中文 English
Products Your Position:Home >DISTILLATION MACHINE >Automatic and continuous working-type waste oil distillation machine with tubular reactor
  • waste oil distillation machine
  • waste oil distillation machine
  • waste oil distillation machine
  • waste oil distillation machine
  • waste oil distillation machine
  • waste oil distillation machine
  • waste oil distillation machine
  • waste oil distillation machine
Automatic and continuous working-type waste oil distillation machine with tubular reactor
  • Order(MOQ) :1
  • Product Details


Automatic and continuous working-type waste oil distillation machine with tubular reactor


1. Raw material: used/waste oil 

This machine is used to extract high quality fuel oil from crude oil or/and waste mineral oil (any kind of waste mineral oil, for example, waste engine oil, motor oil, hydraulic oil, heat transfer oil, transformer oil, tyre/plastic derived oil,waste milling oil, bottom oil, washing oil and so on, as long as it is waste mineral oil) 

2. Product of distillation

Regenerated diesel: the output yield is 80%-85%, the density is about 0.83-0.85. It is widely used as fuel oil in steelworks, ceramic tile factory, ceramics factory, steam boiler to power factory, and it could be the raw material of large oil refinery. It could also mixed with standard diesel, and used in electric generator, and mining machinery equipment.

Heavy oil: the output rate is 15%-20%, sold as fuel oil.

3. Areas needed 

The main parts need 800 ( QYGL-22 as model ), the factory needs 3000-4000.

4.Technological process---waste oil refinery project process flow (Tube type)

Waste oil go into the tube heating furnace through oil pump, and is heated gasification under normal pressure. After distillation (catalystic), it comes into gasified oil, and go through the cooling system, some that could be liquefiable condense into oil, and the other could not be liquefiable go into the reactor to burn as fuel through gas system.

5. Equipment design characteristics

1) This equipment adopts the atmospheric pyrolysis process and catalytic reaction distillation extration technology.

2) It is equipped with perfect environmental protection equipment. For example, waste gas burned system, and smoke treatment system. It is friendly to the environment.

3) High thermal efficiency (refining a ton of waste oil only need 25kg coal). Its capacity is large (50-100tons), the quality of oil is good, and the oil reprocessing technics is good that could make the oil into light yellow, and transparent clear, and keep the color 2-3 months.

4) Efficient gas heating system. During the process, there is some unliquified gas which would be burned sufficiently in the burner we specially desighed. That could produce a large amount of heat energy, and save the energy.

5) This equipment is reasonable disigned, with advanced manufacturing technoloty, a high degree of automation, security facilities, high output rate of oil, and good efficiency.

6. Security

This equipment is of security. During the process, before the unliquified gas burned as fuel oil, it goes through the gas distributor first, and then it goes into the burner through pipeline, which makes the process safe.

7. Environmental Protection

       The Pollution Source and Control Measures

a. Exhaust GasDuring the smoke-dust treatment, exhaust emission can meet the No. One Level National Standards for emissions by using the water film equipment. The gas which can not be liquefied in the condensation will be burned in the hearth as heating fuel. The whole process system is in a sealing state, so there won’t be any pollutional emissions produced in the production process.

b. Waste water: The water in the cooling system is recycle used in sealing state; the rainwater will be collected and discharge into the adjustment pool through the oil separator tank.

c. Waste solid: In this system, there is no waste solid produced.

In the Tubular type reactor, the residues which cannot be evaporated were used as fuel burning in the hearth. 


8. Plant layout





  • Related Products
Contact Us
  • AddressRoom#301, Changtai Bus Station, Zhangzhou City, Fujian Province, China

  • Tel:+86 0596-6322955

  • Fax:+86 0596-8327825

  • Email:Sales@qiyuenergy.com

  • Website:www.qiyuenergy.com

LEADING MANUFACTURER OF WASTE TO FUEL OIL MACHINES AND PROJECT DESIGNER SINCE 2009
closer
What can I do for you?

Ah Thao Wong

Ah Thao Wong